CIES 50
| Availability: | |
|---|---|
| Quantity: | |
CIES 50 IP45 is an all‑in‑one vertical energy storage cabinet integrating UPS emergency backup power and commercial & industrial energy storage, with rated AC power of 30KW and usable capacity of 50KWH. It fully integrates battery packs, BMS, PCS inverter unit, intelligent thermal management and HMI touch screen. No dedicated equipment room is required for fast on‑site deployment. Reaching IP45 protection grade, it performs reliably in dusty and humid industrial environments. It serves both grid‑failure emergency backup and C&I energy‑storage scenarios, ideal for factories, small industrial parks, commercial buildings, data‑room equipment and micro‑grid projects.
Seamless UPS Emergency Backup
Millisecond‑level switch‑over. Instant power supply once grid power fails, protecting production machinery, servers and precision instruments from shutdown, data loss and economic losses.
IP45 High‑protection Cabinet
Industrial‑grade enclosure with dust‑proof and water‑proof performance, suitable for workshop and semi‑outdoor harsh conditions. Compact vertical design saves floor space. Lifting eyes facilitate transportation and installation.
High‑integrated & Easy Deployment
System integration and pre‑commissioning completed in factory. Only simple on‑site wiring is needed, greatly shortening construction period. Multiple units can be paralleled to expand power and capacity on demand.
Intelligent BMS Battery Management
Real‑time monitoring of cell voltage and temperature. Full protection against over‑voltage, under‑voltage, over‑current, short‑circuit and over‑temperature. Cell balancing extends battery cycle life and reduces maintenance workload.
Multi‑mode Operation
Supports grid‑tied peak‑valley arbitrage, off‑grid island backup and PV‑coupled energy storage. Local touch screen for status check and alarm review. Compatible with remote monitoring system.
‑ UPS uninterruptible backup for factory critical equipment
‑ Power failure protection for office buildings, computer rooms and laboratories
‑ Small‑scale C&I peak‑valley arbitrage to cut electricity expense
‑ Energy storage matched with photovoltaic system
‑ Off‑grid / island micro‑grid and site emergency power supply
System Information
Rated AC Power: | 30KW |
Rated Capacity: | 51.2kWh |
DC Battery Parameters
Capacity: | 100Ah |
Battery Pack Configuration: | IP160S |
Rated Voltage: | 512V |
Voltage Range: | 448V~576V |
Charge/Discharge Rate: | 0.5C |
Depth of Discharge: | 98% |
PCS
AC Power: | 30kW |
Operating Mode: | Supports Grid-tied & Off-grid |
Rated Grid-connected/Islanding Voltage: | 400V/230V |
Rated Mains Frequency: | 50Hz |
Connection Method: | Three-phase Four-wire |
Operating Environment
Protection Rating: | IP42 |
Noise: | 75dB |
Relative Humidity: | 0-95% |
Maximum Operating Altitude: | 3000m |
Dimensions (Width × Depth × Height): | 1001*617.5*1654.5mm |
Weight: | 534kg |
Battery compartment cooling method: | Natural air cooling |
PCS compartment cooling method: | Natural air cooling |
Fire suppression system: | Aerosol fire suppression |
Communication protocol: | CAN/RS485 |
Certification | UN38.3 |

