105KW/215KWH
ShineGiant
| color: | |
|---|---|
| Availability: | |
| Quantity: | |
The 100kW/215kWh all‑in‑one air‑cooled energy storage cabinet is developed for commercial and industrial outdoor energy‑storage projects. It integrates battery clusters, BMS, PCS, air‑cooling thermal system, fire‑suppression unit and monitoring module inside one cabinet.
No dedicated equipment room is required, supporting direct outdoor installation. Adopting air‑cooled solution, it eliminates liquid‑cooling pipelines and coolant maintenance work, simplifies site construction and reduces full‑lifecycle O&M cost. It is a cost‑effective choice for C&I energy‑storage projects for factories, industrial parks, commercial buildings and micro‑grid systems.

Module‑level Fire Suppression
Independent fire‑suppression unit for each battery module. Early fire detection and suppression stops thermal runaway spreading at module level.
Layered Cabinet Safety Isolation
Physical separation among battery compartment, electrical compartment and cooling compartment to prevent fault spreading. Comply with Class‑A fire safety requirements.
Multi‑layer Electrical Protection
Full protection against over‑voltage, under‑voltage, over‑current, over‑temperature, short‑circuit and insulation fault. BMS monitors cell voltage and temperature in real‑time and triggers alarm & protection when abnormal status occurs.
Outdoor‑grade Protection
Outdoor‑adapted cabinet structure, reliable performance under high‑temperature, rainy and dusty working conditions.
100% Ultra‑deep Discharge
Full‑depth discharge capability maximizes usable capacity for peak‑valley arbitrage and backup power scenarios to improve project revenue.
Grid‑friendly Connection
Built‑in automatic voltage control and reactive power compensation. Support grid‑tied and off‑grid island mode, realize peak shaving and power quality optimization.
Fast Integration & Flexible Expansion
Most commissioning work finished in factory. On‑site installation only needs simple connection. Multiple cabinets can be paralleled for flexible power & capacity expansion.
Intelligent Air‑cooling System
Fan speed adjusts dynamically according to battery temperature to balance internal temperature and reduce cell temperature difference, extend battery cycle life. Zero risk of coolant leakage, easy maintenance.

DC Battery Parameters
Cell Type: | LFP3.2V 280Ah |
Battery Voltage Range: | 600V~876V |
Battery Pack Configuration: | 1P240S |
Rated Current: | 140A |
System Energy Storage Capacity: | 215kWh |
Rated Voltage: | 768V |
Rated Current: | 100kW |
AC Side Parameters
Rated AC Power: | 100kW |
Rated AC Voltage: | 400V |
Rated Frequency: | 50Hz |
Maximum AC Current: | 128.2A |
Output Voltage Frequency: | 50Hz/60Hz |
Main Grid Voltage Range: | 340~440V |
Maximum Output Current: | 141.6A |
Maximum Efficiency: | ≥98.5% |
System Parameters
System Configuration: | 1P240S (10×1P48S) |
Cooling Method: | Air Cooling |
Operating Temperature: | -30~60℃ |
Storage Humidity: | RH≤85% |
Ambient Humidity: | RH≤75% |
Application Altitude: | ≤2000m |
System Dimensions (L×W×H): | 1238(L)*1473(W)*2280(H)mm |
Communication Interface: | RS485/Ethernet/Bluetooth/WIFI/4G (Optional) |
Fire Protection System: | Perfluorohexanone |
Protection Rating: | IP54 |
Weight: | 2.5t |

